Replace A Toner Cartridge In A Canon Printer Via Canon Support

For maintaining your printer to get clear printouts, replacing a toner cartridge on a regular basis is required. If you have a Canon printer in your office, you may find that you need to do so very frequently. Your Canon printer has an access door on the top or front of the unit by lifting it up you can remove or check the status of the installed ink cartridges. You can open your printer's access door if the printout is faded or color is missing, and replace the empty ink cartridge to return the printer's output in its normal quality. The entire process may take a couple of minutes but if you don’t have technical knowledge, it may take few more minutes and yet unable to do so. At that point, you will have to obtain Canon Support from our dexterous technicians. They will surely direct you all the possibilities of changing an ink cartridge with an ease. Instead of taking assistance from them, you may also read this blog as here are some relevant steps which will be effective for you.

Steps To Replace A Toner Cartridge In A Canon Printer

Follow the below-written instructions appropriately to replace or load a toner cartridge on your Canon printer. Have a glimpse on the noted points here:

·         First of all open the access door for your Canon printer by lifting it up. In many cases, you can make the printer's ink cartridges accessible by placing your hand under the top panel of the printer and lifting it up. If your printer has a built-in scanner, locate and lower the plastic arm inside the scanner bed to lock the panel in place. Some Canon printer models, such as the PIXMA PRO-1, do not have top access doors; in that situation, look for access panels on the left and right sides of the paper tray and then pull them forward to open them.

·         Now, locate the empty cartridge by checking the status lights after opening the access door. The light will either blink or turn off when the cartridge is empty.

·         Push the tab above or in front of the empty cartridge to release it from its slot. Lift or pull the cartridge out of the Canon printer.

·         Replace the ink cartridge from its box. Check out the wrapper for instructions guiding you to shake the cartridge before opening it. If shaking the cartridge is required, then simply hold it parallel with the floor and shake several times with a gentle side-to-side motion.

·         Remove the ink cartridge from its wrapper if it is full and needed to fill-up the ink.

·         Push the cartridge into the empty slot gently so that the metal contacts face the inside of the slot and the release tab faces toward you. When installed properly, the cartridge snaps into place and the light turns on.

·         After that, close the printer's access door and wait for the printer's indicator light to go solid before trying to print.

Make Use Of Canon Printer Support If Want Handy Solution

In case you do not get satisfied with these above information, then you can take desired possible solution in an effortless manner at Canon Printer Support. The talented and expert team is working all round the clock on the provided helpline number to deliver fruitful solution at an affordable cost.