Genuine ink cartridges for Canon Printer are crucial in terms of achieving good-quality printing results. In fact, ink cartridges are the ones that hold the desired ink and also are an integral part of printing documents. But, there are times when the ink cartridges won’t work while printing, and hence no information is visible on the printed paper. In such a scenario, all you need is to Reset Canon Printer ink cartridges appropriately even after refilling the remaining ink. Don’t worry! If you have less tech knowledge as the comprehensive guide for ink cartridge reset is gathered in this post. Continue reading to learn!
When Need To Reset Canon Ink Cartridges After Refill?
When the cartridge is running out of ink or low, you will not get satisfactory printouts of your documents from your Canon Printer product. That’s why, checking out the level of ink stored in the cartridges is exclusively essential. Low or empty ink cartridges prevent your printer from printing anything. In such a scenario, it is required to reset the Canon ink cartridge with the use of a chip resetter that you receive with a refill kit.
Learn How To Reset Canon Printer Ink Cartridges Perfectly
Below-noted are the proactive methods of resetting your Canon ink cartridges. Thus, let’s begin to follow the provided guide and have your Canon Printer reset with authentic ink cartridges.
Using Canon IJ Printer Assistant Tool
You can very frequently Reset Canon Ink Cartridges from the Canon IJ Printer Assistant tool. Here’s how:
- First, open the Canon IJ Printer Assistant Tool on your Windows PC.
- Make sure the printer is ON.
- Now, click on “Remaining Ink Notification Settings.”
- Now, from the dropdown button of “Resets the Remaining Ink Level Count:” select the ink color as per your need.
- Then, click the “Reset” tab to begin the resetting process right away for the remaining ink level count.
- Once done, the confirmation message pops up. Simply, click “OK.”
- Finally, click “Close” and proceed with the print jobs.
Using A Chip Resetter
The ink cartridges stored in your Canon Printer are somehow equipped with chips that keep on monitoring the level of ink. It helps you to securely install the original ink into the cartridges for quality printing solutions. A chip resetter in fact comes with the ink kits. Here’s how to use it for ink reset:
- First, carefully take the ink cartridges out of the Canon Printer and place them on a resetter plate.
- Now, make sure that there is contact between the cartridge’s chip and the resetter plate. You can verify this statement simply by checking the chip resetter and observing the LED light flashing on it.
- Now, keep the light pressure on the ink cartridge until the LED light blows constantly and steadily.
- After doing so, resetting Canon Ink Cartridges will be done.
- In the end, take the ink cartridges from the resetter and place them back into their slots in your Canon Printer device.
Canon Printer Without Display Screen
Even if your printer model of Canon doesn’t have a display screen but still you have to Canon Reset Printer, here’re the steps to follow:
- Press the “Resume” button and the Printer’s Power button simultaneously for approximately 5-6 seconds.
- After that, release the “Resume” button.
- Push the “Resume” button 5 times consecutively in a row or you can say back to back.
- Then, release the Power button.
- Within a couple of seconds, you will possibly notice the blinking light of the power/ink level goes steady.
- Now, the print job can proceed under the ‘ink out’ mode without any hindrance.
0 Comments